Carbon TS
Carbon fiber sport tripod for wildlife photography, precision shooting, and outdoor observation.
Ultra-fast deployment with inverted leg system and one-motion locking.
Designed for speed, stability, and repeatable performance.
Product specification
Carbon Fiber Sport Tripod for Wildlife Photography, Precision Shooting and Dynamic Field Use
CARBON TS is a carbon fiber sport tripod developed for precision shooting competitions and dynamic field environments where speed, stability, and repeatability are essential.
Designed for shooters and photographers operating under time pressure, CARBON TS features an inverted leg deployment system that enables extremely rapid setup, allowing immediate positioning and fast target transitions.
The structure combines high modulus carbon fiber tubes with CNC-machined components made from extruded magnesium alloys, ensuring exceptional rigidity, low weight, and long-term durability.
A key feature of the system is the protected telescopic section design. Each section incorporates dedicated sealing elements designed to help reduce the ingress of dust, moisture, and contaminants during normal field use, helping preserve internal components and maintain smooth operation over time. Recommendations regarding use in particularly demanding environments can be found in the Technical Specifications section.
Dedicated pressure relief valves allow smooth extension and retraction of the telescopic sections while equalizing internal pressure, improving operational fluidity during repeated use in the field.
The telescopic movement is smooth and controlled, allowing rapid height adjustments during dynamic stages. The locking system is engineered for maximum efficiency: by rotating the lowest section, all sections are simultaneously locked with a single movement, allowing immediate stabilization without interrupting the shooting sequence. When additional locking force is required, each section can also be individually tightened through the high-grip ergonomic interfaces.
The inverted opening design enables exceptionally fast deployment and compact transport. Combined with the dedicated leg angle adjustment system, it allows shooters and photographers to adapt quickly to changing terrain and shooting positions.
The removable feet are connected through a standard 3/8”-16 UNC thread, ensuring compatibility with spikes and other accessories for different terrain conditions.
The structure incorporates a built-in leveling bubble and a side 3/8”-16 UNC accessory port for mounting additional equipment.
The removable center disk is designed to accept dedicated accessories, increasing the versatility and modularity of the system. The head is secured through an axial locking system that ensures a stable and reliable connection.
All hardware components are manufactured from stainless steel to ensure excellent corrosion resistance and long-term reliability.
Designed and manufactured for users who demand maximum speed, stability, and reliability, CARBON TS delivers a professional support platform for precision shooting, long-range applications, telephoto photography, and demanding outdoor environments.
For detailed dimensions, weight specifications, available configurations, and care and maintenance recommendations, please refer to the Technical Specifications section.
Technical specifications
TS42
- sections Ø [mm]: first 32,5 mm - second 36,5 mm
- opening angles: 23° - 53° - 87°
- sections: 2
- packed length [mm - in]: 960 – 37,8
- max height [mm - in]: 1600 – 62,99
- weight [Kg - lb]: 1,98 – 4,36
- maxload [Kg - lb]: 30 - 66
TS32
- sections Ø [mm]: first 28,5 mm - second 32,5 mm
- opening angles: 23° - 53° - 87°
- sections: 2
- packed length [mm - in]: 960 – 37,8
- max height [mm - in]: 1600 – 62,99
- weight [Kg - lb]: 1,8 – 3,97
- maxload [Kg - lb]: 30 - 66
TS32S
- sections Ø [mm]: first 28,5 mm - second 32,5 mm
- opening angles: 23° - 53° - 87°
- sections: 2
- packed length [mm - in]: 530 – 20,8
- max height [mm - in]: 800 – 31,5
- weight [Kg - lb]: 1,45 – 3,20
- maxload [Kg - lb]: 30 - 66
TS42S
- sections Ø [mm]: first 32,5 mm - second 36,5 mm
- opening angles: 23° - 53° - 87°
- sections: 2
- packed length [mm - in]: 530 – 20,8
- max height [mm - in]: 800 – 31,5
- weight [Kg - lb]: 1,55 – 3,42
- maxload [Kg - lb]: 30 - 66
TS32C
- sections Ø [mm]: first 28,5 mm - second 32,5 mm
- opening angles: 23° - 53° - 87°
- sections: 2
- packed length [mm - in]: 530 – 20,8
- max height [mm - in]: 800 – 31,5
- weight [Kg - lb]: 1,23 – 2,7
- maxload [Kg - lb]: 30 - 66
TS42C
- sections Ø [mm]: first 32,5 mm - second 36,5 mm
- opening angles: 23° - 53° - 87°
- sections: 2
- packed length [mm - in]: 530 – 20,8
- max height [mm - in]: 800 – 31,5
- weight [Kg - lb]: 1,38 – 3,04
- maxload [Kg - lb]: 30 - 66
Care & Maintenance
The sealing system integrated into the telescopic sections is designed to help reduce the ingress of dust, moisture, and contaminants during normal outdoor use. While this architecture provides a high level of protection in the field, periodic inspection and maintenance are recommended to ensure optimal long-term performance.
After use in environments containing sand, mud, river sediment, dust, or other abrasive contaminants, any visible residue should be removed from the leg sections before retracting them. This simple procedure helps limit the introduction of contaminants into the sliding and locking mechanisms.
For photographers who regularly operate in particularly demanding environments, periodic cleaning of the tripod is recommended as part of normal equipment maintenance.
Particular attention should be paid when operating in environments where water, sand, and sediment are present. Prolonged immersion of the leg sections is not recommended, as contaminants may accumulate over time and affect the smooth operation of the sliding and locking mechanisms.
Following exposure to water, the tripod should be thoroughly rinsed with fresh water, allowed to dry completely, and inspected to ensure proper operation of all moving components before storage.
Proper maintenance helps preserve operational reliability and maximize the service life of the tripod.
Compatible gears
A. Standard Use (without 180° leg folding)
Compatible with any tripod head featuring a standard 3/8"-16 mounting thread.
B. 180° Leg Folding Compatibility – TS Standard Models*
The 180° reverse-folding design has been engineered and verified for compatibility with:
- Zenelli BX Ball Head
- Zenelli BC Ball Head
- Zenelli BS Ball Head
- All Zenelli Gimbal Heads
C. 180° Leg Folding Compatibility – TS-C Models*
For TS-C models, the 180° reverse-folding design has been engineered and verified for compatibility with:
- Zenelli BC Ball Head
* While third-party heads can be mounted via the standard 3/8"-16 mounting thread, compatibility with the 180° folding system may vary depending on the head dimensions and design. Therefore, full 180° leg folding cannot be guaranteed for heads not listed above.
Supplied with
- 1x Anti dust bag
- 4x Key
- 2 years warranty, extendable to 5 years with online registration
Download
Production
Product designed and developed in Italy (watch video)
Shipping
Worldwide secure express shipping
Support
Monday-Friday
09:00-12:00 – 14:00-17:00
+39 0424 1958001
Register your product
Register your product and extend your warranty