CARBON T is the family of Carbon Fiber Tripods that aims to differentiate itself from the market, both from an aesthetic and functional point of view. Produced only with CNC technology from extruded magnesium alloys and high modulus carbon fiber tubes. CARBON T can be with a wide cross TX or a compact cross TC, both crosses can fit all available tube diameters. All CARBON T models are characterized by:
Airtight sections: you will no longer have to worry about spare parts or cleaning the inside of the leg, the sections are in fact equipped with highly resistant and infinitely durable seals.
Relief valve: CARBON T is equipped with three relief valves to allow the opening and closing of the telescopic sections and at the same time protect the product from water splashes.
Soft telescopic smoothness.
Instant locking of the sections: forget the old locking systems of the sections, once you have tested this locking you will never do without it and it will seem strange and inconvenient to go back, this locking in fact automatically locks all the sections by rotating the last section and If necessary, you can tighten the different sections using the appropriate high-grip ergonomic rubber pads.
Removable feet: remove the feet with the appropriate hex wrench to add available ferrules or accessories, the screw is always 3/8-16UNC.
180° rotation of the legs (*): we wanted to adopt complete rotation of the legs for all models, in this way you can avoid removing the heads from the tripod and maintain the compactness necessary for transport.
Camouflage color: all models are equipped with Coyote color, a particular and distinctive color, this color in fact camouflages different environments very well.
Ergonomic leg opening lever: Opening the legs has never been so easy and ergonomic, with a simple index finger it is possible to press the lever to rotate the legs, which will close automatically.
Leveling bubble.
Side attachment 3/8-16UNC.
Removable central disk: in all models we have foreseen the removal of the central disk in order to house the available accessories.
Integrated hex key: in the TX model we have integrated the 3 mm hexagonal key for locking the central disc. The key will be attached by a magnet and will remain in place so as not to be lost.
Head locking screw: To lock the head to the central disk we have provided an axial screw.
Stainless Steel screws.
(*) IMPORTANT: 180° rotation is guaranteed for the TX model with all Zenelli Tripods Heads and is guaranteed for the TC model only with future Zenelli Ball Heads.
